国产明星婬乱一级毛片视频_亚洲国产精品作爱爽爽爽_2024日韩中文字幕mv_人人狠狠综合99综合久久_日韩av在线精品一区二区三区_另类制服日韩亚洲av时刻帝_黄色视频AAA级毛片_国产一级 片内射视频播放_宅宅美剧电影推荐全部免费观看_在线观看免费中文欧美

微差壓變送器PT500-802
    型號:PT500-802
    進口型微壓差壓力芯片,最少壓差100Pa;
    3-5倍耐壓,適用于干燥性氣體壓差測量;
    高精度、穩定、數字標定調節、放大集成電路;
    零點、滿度,溫補、線性補償;
    鋁合金氧化外殼;8mm+M10快速插頭過程連接;

    常用關鍵字:
    微差壓變送器 微差壓傳感器
    微壓差壓力變送器 微壓差壓力傳傳感器
    產品優勢:

    型號:PT500-802
    進口型微壓差壓力芯片,最少壓差100Pa;
    3-5倍耐壓,適用于干燥性氣體壓差測量;
    高精度、穩定、數字標定調節、放大集成電路;
    零點、滿度,溫補、線性補償;
    鋁合金氧化外殼;8mm+M10快速插頭過程連接;

    常用關鍵字:
    微差壓變送器  微差壓傳感器
    微壓差壓力變送器 微壓差壓力傳傳感器

    Model: PT500-802
    The minimum differential pressure is 100Pa;
    3-5 times withstand voltage, suitable for dry gas differential pressure measurement;
    High precision, stable, digital calibration adjustment, amplification integrated circuit;
    Zero point, fullness, temperature compensation and linear compensation;
    Aluminum alloy oxidation shell; 8mm + m10quick plug process connection;

    Common keywords:
    Micro differential pressure transmitter micro differential pressure sensor
    Micro differential pressure transmitter


    芯       片:
    進口型微壓差壓力芯片,最少壓差100Pa;
    3-5倍耐壓,適用于干燥性氣體壓差測量;
    零點、滿度,溫補、線性補償;
    高阻抗、高精度、高穩定性;
    100萬次使用壽命以上;

    信號處理及輸出:
    24位ADC采樣處理芯片;
    DSP數字信號調理算法;
    多點性線溫度校準;
    電壓電流過載保護;
    標準工業信號輸出:4-20mA(二線制),0-20mA(三線制),0-5VDC,0-10VDC,0.5-4.5VDC(三線制);

    數字通訊信號輸出:RS485-RTU、超低功耗RS485-RTU
    采用先進的32bit微處理器和24bit ADC
    傳輸協議采用通用的MODBUS-RTU協議
    支持波特率:1200~57600bps,校驗位:NONE、ODD、EVEN
    支持用戶二次校準、清零、反清零、恢復出廠等操作
    支持11種單位切換,支持浮點型、整型、百分比、格式化輸出
    采集間隔0~43200秒(12小時)可設,既可連續采集,滿足高速采集的場合,也可單次觸發采集,最大限度降低功耗

    數字通訊信號輸出:Can2.0B
    測量速率:10...1000Hz 可設置,默認50Hz

    CANopen輸出內置 完整的 CANopen 協議棧,符合 DS301、DS404 規范,支持 LSS 服務,支持 BootLoader 在線 升級;
    支持波特率(kbps)20/50/100/125/250(默認)/500/800/1000;支持特性 NMT/Heartbeat/SDO/PDO/LSS/Bootloader;CANopen 協議??梢愿鶕?jù)用戶的要求進行定制;

    J1939輸出內置 J1939 協議棧,可以自由配置 PGN、SPN 以及 NAME,支持 BootLoader 在線升級;
    支持波特率(kbps)20/50/100/125/250(默認)/500/800/1000
    ;支持特性PGN、SPN、NAME等自由配置
    ,J1939 協議??梢愿鶕?jù)用戶的要求進行定制;

    結       構:
    鋁合金氧化外殼;8mm+M10快速插頭過程連接;
    結構小,緊線螺母防水出線方式電氣連接;
    配套四/五芯屏蔽電纜;

    應      用:
    負壓、無塵車間、科室等壓力測量與監控;
    樓宇、通風等壓力測量與監控;
    吸塵管道,廢氣處理等壓力測量與監控;



    Chip:
    The minimum differential pressure is 100Pa;
    3-5 times withstand voltage, suitable for dry gas differential pressure measurement;
    Zero point, fullness, temperature compensation and linear compensation;
    High impedance, high precision and high stability;
    More than 1 million times of service life;

    Signal processing and output:
    24 bit ADC sampling and processing chip;
    DSP digital signal conditioning algorithm;
    Multipoint linear temperature calibration;
    Voltage and current overload protection;
    Standard industrial signal output: 4-20mA (two-wire system), 0-20mA (three wire system), 0-5vdc, 0-10vdc, 0.5-4.5vdc (three wire system);

    Digital communication signal output: rs485-rtu, ultra-low power rs485-rtu
    Advanced 32 bit microprocessor and 24 bit ADC are adopted
    The transmission protocol is MODBUS-RTU
    Support baud rate: 1200 ~ 57600bps, check bits: none, odd, even
    Support the user's secondary calibration, reset, anti reset, restore factory operations
    Support 11 kinds of units switching, support floating point, integer, percentage, formatted output
    The acquisition interval of 0 ~ 43200 seconds (12 hours) can be set, which can not only meet the needs of high-speed acquisition, but also trigger acquisition once to 

    minimize power consumption

    Digital communication signal output: CAN2.0B
    Measurement rate: 10... 1000Hz can be set, the default is 50 Hz

    CANopen output built-in complete CANopen protocol stack, in line with ds301, ds404 specifications, support LSS services, support bootloader online upgrade;
    Support baud rate (kbps) 20 / 50 / 100 / 125 / 250 (default) / 500 / 800 / 1000; support features of NMT / heartbeat / SDO / PDO / LSS / bootloader; CANopen protocol 

    stack can be customized according to user requirements;

    J1939 output has built-in J1939 protocol stack. PGN, SPN and name can be configured freely, and bootloader online upgrade is supported;
    Support baud rate (kbps) 20 / 50 / 100 / 125 / 250 (default) / 500 / 800 / 1000; support free configuration of features such as PGN, SPN and name
    The J1939 protocol stack can be customized according to the user's requirements;

    Structure:
    Aluminum alloy oxidation shell; 8mm + m10quick plug process connection;
    Small structure, tight wire nut waterproof, electrical connection;
    Supporting four / five core shielded cable;

    Application:
    Pressure measurement and monitoring of negative pressure, dust-free workshop, Department, etc;
    Pressure measurement and monitoring of buildings, ventilation, etc;
    Pressure measurement and monitoring of dust collection pipeline, waste gas treatment, etc;

    應用領域:
    • 智慧城市

    • 消防系統

    • 天然氣管道

    • 送風系統

    規格參數
    一、技術參數
    測量介質:干燥性氣體
    壓力形式:差壓
    量    程:
    0~100、200、300、500、1000(Pa);
    0~1、2、3、5、10、20、30、40、50、70、100(KPa);
    -100KPa~-10KPa~0~100(KPa); 
    ±500Pa~±100KPa;
    靜壓(耐壓):3~5倍量程
    綜合精度:±0.25%FS;±0.5%FS;±1%FS
    非 線 性:≤0.5%FS
    重 復 性:≤0.25%FS
    輸出信號:
    電流型:4~20mA二線制;4~20mA/0-20mA三線制
    電壓型:0~5VDC、0~10VDC、0.5~4.5VDC三線制
    數字型:RS485-RTU、低功耗RS485-RTU
    Can2.0B(支持CANopen、J1939 協議)
    供電電壓:
    24VDC(9~30VDC) 
    5VDC(0.5~4.5VDC輸出型)
    3.1~6.1VDC(低功耗RS485-RTU)
    壽    命:≥100萬次
    絕緣阻抗:≥1000 MΩ/100VDC
    負載阻抗:電流輸出: ≤800Ω;電壓輸出:≥50KΩ
    介質溫度:-20~70℃/
    環境溫度:-20~70℃
    補償溫度:0~60℃
    響應時間:≤3mS
    過載壓力:150%FS
    破壞壓力:3倍量程(量程小于40MPa);2倍量程(量程大于41MPa)
    電氣連接:防水緊線螺母直接出線,可配套防爆電氣連接
    防護等級:IP65/IP68
    連接電纜:緊線螺母,標準長度:3米
    連接材料:鋁合金
    過程連接:φ8快速插頭+M10螺紋(通用)……可用戶制訂規格

    二、規格型號

    三、結構尺寸

    四、輸出信號

    Measuring medium: dry gas
    Pressure form: differential pressure
    Range:
    0~100、200、300、500、1000(Pa);
    0~1、2、3、5、10、20、30、40、50、70、100(KPa);
    -100KPa~-10KPa~0~100(KPa);
    ±500Pa~±100KPa;

    Static pressure (withstand voltage): 3 ~ 5 times of measuring range
    Comprehensive accuracy: ± 0.25% FS; ± 0.5% FS; ± 1% FS
    Nonlinearity: ≤ 0.5% FS
    Repeatability: ≤ 0.25% FS
    Output signal:
    Current type: 4-20mA two-wire system; 4-20mA / 0-20mA three-wire system
    Voltage type: 0 ~ 5VDC, 0 ~ 10VDC, 0.5 ~ 4.5vdc three wire system
    Digital type: rs485-rtu, low power rs485-rtu
    CAN2.0B (supports CANopen, J1939 Protocol)

    Supply voltage:
    24VDC(9~30VDC)
    5VDC (0.5 ~ 4.5vdc output type)
    3.1 ~ 6.1vdc (low power rs485-rtu)

    Service life: ≥ 1 million times
    Insulation impedance: ≥ 1000 m Ω / 100VDC
    Load impedance: current output: ≤ 800 Ω; voltage output: ≥ 50K Ω
    Medium temperature: - 20 ~ 70 ℃/
    Ambient temperature: - 20 ~ 70 ℃
    Compensation temperature: 0 ~ 60 ℃
    Response time: ≤ 3MS
    Overload pressure: 150% FS
    Failure pressure: 3 times of measuring range (less than 40MPa); 2 times of measuring range (measuring range greater than 41mpa)
    Electrical connection: Waterproof tight wire nut directly leads out, can be matched with explosion-proof electrical connection
    Protection grade: IP65 / IP68
    Connecting cable: tightening nut, standard length: 3M
    Connection material: aluminum alloy
    Process connection: φ 8 quick plug + M10 thread (Universal) Specification can be made by users

    訂購注意事項
    PT500-802產品訂購注意事項
    1、產品量程選擇:
       為了使產品精度、壽命、穩定性等功能達到最佳效果,產品的量程選擇參照以下公式計算:
       量程 = 系統最大壓力 X (1.2-1.5)倍;
       產品的實際測量壓力范圍,應該在量程范圍的15%-80%;
       靜壓(耐壓)為量程值的3到5倍,即高壓端最大壓力值;

    2、產品供電及輸出:
       供電范圍的選擇按產品的個輸出規格確定:
       常規4-20mA/0-20mA、0-5V/10V輸出,直流12-30VDC供電;
       通用RS485-RTU輸出,直流12-30VDC供電;
       0.5-4.5VDC輸出,直流5VDC;

    3、用戶要了解產品的測量介質特性:
       介質規格、介質溫度、介質純度(是否含有雜質或顆粒等);

    4、用戶要了解產品的安裝環境及安裝方式:
       室內或室外安裝;
       環境溫度;
       要求的密封等級;
       設備的振動范圍;
       安裝方式:螺紋、法蘭、特殊結構;
       安裝空間是否滿足產品外形尺寸;


    Precautions for ordering PT500-802 products
    1. Product range selection:
    In order to achieve the best effect of product precision, life, stability and other functions, the range selection of the product is calculated according to the following formula:
    Range = x (1.2-1.5) times of the maximum system pressure;
    The actual measuring pressure range of the product should be 15% - 80% of the measuring range;
    The static pressure (withstand voltage) is 3 to 5 times of the range value, that is, the maximum pressure value at the high pressure end;

    2. Product power supply and output:
    The selection of power supply range is determined according to the output specifications of the product:
    Conventional 4-20mA / 0-20mA, 0-5V / 10V output, DC 12-30vdc power supply;
    General rs485-rtu output, DC 12-30vdc power supply;
    0.5-4.5vdc output, DC 5VDC;

    3. The user should understand the measurement medium characteristics of the product:
    Medium specification, medium temperature, medium purity (whether containing impurities or particles, etc.);

    4. Users should understand the installation environment and installation method of the product:
    Indoor or outdoor installation;
    Ambient temperature;
    Required sealing level;
    Vibration range of equipment;
    Installation method: thread, flange, special structure;
    Whether the installation space meets the overall dimension of the product;

    使用注意事項

    嚴禁產品供電范圍超過產品規定標準;
    產品測量介質為:干燥性氣體,嚴禁用于測量液體、蒸汽或濕度大氣體介質;
    嚴禁使用硬物(如:螺絲刀、手指、鐵釘?shù)龋┤ナ沟脡毫δて軌毫y量輸出;
    電源和信號線按訂購產品規格要求,正確接線;
    產品安裝時,引壓管采用8mm硬質氣管,防止氣體壓力使用氣管膨脹;
    嚴禁被測系統的介質溫度、壓力量程、激勵電壓超過變送器的額定使用范圍;
    注意保護變送器引出電纜,現場使用跨度過大時,建議使用金屬管保護或架空;
    壓力變送器屬精密計量儀器,切勿強加沖擊、摔打,以免損壞芯體
    產品安裝于通風、干燥、無強腐蝕環境,露天安裝加防護裝置,避免陽光直接照射;
    產品儀表嚴禁進水/漏水/泡水情況,露天安裝加防護裝置,避免陽光直接照射;


    It is strictly prohibited that the power supply scope of the product exceeds the specified standard of the product;
    The measuring medium of the product is: dry gas. It is forbidden to measure liquid, steam or gas medium with high humidity;
    It is forbidden to use hard objects (such as: screwdrivers, fingers, nails, etc.) to make the pressure diaphragm output by pressure measurement;
    The power supply and signal line should be connected correctly according to the product specification;
    When the product is installed, the pressure pipe is made of 8mm hard gas pipe to prevent the expansion of the gas pipe under gas pressure;
    It is strictly prohibited that the medium temperature, pressure range and excitation voltage of the measured system exceed the rated range of the transmitter;
    Pay attention to protect the outgoing cable of transmitter. When the span is too large, it is recommended to use metal tube for protection or overhead;
    Pressure transmitter is a kind of precision measuring instrument. Do not force impact and fall to avoid damaging the core body
    The product is installed in a ventilated, dry and non corrosive environment. It is installed in the open air with protective devices to avoid direct sunlight;
    Do not let water / water leak / soak into the instrument. Install protective devices in the open air to avoid direct sunlight;

    常見問題
    我要提建議
    姓名
    聯系電話
    聯系QQ
    聯系微信
    電子郵箱
    地址
    建議內容
    佛山市普量電子有限公司

    電話:0757-26619568 傳真: 0757-26619508

    24小時在線技術支持:13790092618

    云平臺:www.puliangiot.com

    地址:佛山市順德區容桂街道華口社區華天南一路2號杰森家電智造中心3棟202號

    版權所有©佛山市普量電子有限公司